dmesg - ASUS NVIDIA GeForce GT 610
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17)
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d5f7ffff] usable
BIOS-e820: [mem 0x00000000d5f80000-0x00000000d5f8dfff] ACPI data
BIOS-e820: [mem 0x00000000d5f8e000-0x00000000d5fcffff] ACPI NVS
BIOS-e820: [mem 0x00000000d5fd0000-0x00000000d5ffffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000229ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M3A78, BIOS 0602 09/01/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22a000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 00D0000000 mask FFFC000000 write-back
4 base 00D4000000 mask FFFE000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 000000022a000000 aka 8864M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xd6000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd5f80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x01d29000, 0x01d29fff] PGTABLE
BRK [0x01d2a000, 0x01d2afff] PGTABLE
BRK [0x01d2b000, 0x01d2bfff] PGTABLE
BRK [0x01d2c000, 0x01d2cfff] PGTABLE
BRK [0x01d2d000, 0x01d2dfff] PGTABLE
BRK [0x01d2e000, 0x01d2efff] PGTABLE
RAMDISK: [mem 0x35ff6000-0x36ff2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB530 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000D5F80100 000054 (v01 090108 XSDT1556 20080901 MSFT 00000097)
ACPI: FACP 0x00000000D5F80290 0000F4 (v03 090108 FACP1556 20080901 MSFT 00000097)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150930/tbfadt-623)
ACPI: DSDT 0x00000000D5F805C0 00A022 (v01 A1056 A1056001 00000001 INTL 20051117)
ACPI: FACS 0x00000000D5F8E000 000040
ACPI: FACS 0x00000000D5F8E000 000040
ACPI: APIC 0x00000000D5F80390 00006C (v01 090108 APIC1556 20080901 MSFT 00000097)
ACPI: MCFG 0x00000000D5F80400 00003C (v01 090108 OEMMCFG 20080901 MSFT 00000097)
ACPI: OEMB 0x00000000D5F8E040 000071 (v01 090108 OEMB1556 20080901 MSFT 00000097)
ACPI: HPET 0x00000000D5F8A5F0 000038 (v01 090108 OEMHPET 20080901 MSFT 00000097)
ACPI: SSDT 0x00000000D5F8A630 00028A (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000229ffffff]
NODE_DATA(0) allocated [mem 0x229ff6000-0x229ff9fff]
Zone ranges:
DMA32 [mem 0x0000000000001000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000229ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000d5f7ffff]
node 0: [mem 0x0000000100000000-0x0000000229ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000229ffffff]
On node 0 totalpages: 2096925
DMA32 zone: 13693 pages used for memmap
DMA32 zone: 21 pages reserved
DMA32 zone: 876317 pages, LIFO batch:31
Normal zone: 19072 pages used for memmap
Normal zone: 1220608 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xd5f80000-0xd5f8dfff]
PM: Registered nosave memory: [mem 0xd5f8e000-0xd5fcffff]
PM: Registered nosave memory: [mem 0xd5fd0000-0xd5ffffff]
PM: Registered nosave memory: [mem 0xd6000000-0xff6fffff]
PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
e820: [mem 0xd6000000-0xff6fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff880229c00000 s92888 r8192 d29992 u524288
pcpu-alloc: s92888 r8192 d29992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064139
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xcc000000-0xcdffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xcc000000-0xcfffffff] (65536KB)
PM: Registered nosave memory: [mem 0xcc000000-0xcfffffff]
Memory: 8092332K/8387700K available (5709K kernel code, 1065K rwdata, 2848K rodata, 1304K init, 828K bss, 295368K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133800353568 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2611.854 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.70 BogoMIPS (lpj=10447416)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Disabling memory control group subsystem
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c52000 - ffffffff81c58000)
ftrace: allocating 23690 entries in 93 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (family: 0xf, model: 0x43, stepping: 0x2)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10435.43 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xd5f8e000-0xd5fcffff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d6000000 aka 3424M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d6000000, dfffffff]
TOM2: 000000022a000000 aka 8864M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xd6000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x22a000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd6000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xf9fff800-0xf9fffbff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf9ffe000-0xf9ffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xf9ffd000-0xf9ffdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf9fff000-0xf9fff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf9ffc000-0xf9ffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xf9ffb000-0xf9ffbfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf9ffa800-0xf9ffa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf9ff4000-0xf9ff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xf9ff9000-0xf9ff9fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 0x30: [mem 0xfbe80000-0xfbefffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbe7c000-0xfbe7ffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:06.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd6000000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xd5f80000-0xd7ffffff]
e820: reserve RAM buffer [mem 0x22a000000-0x22bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 2]
pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0b00-0x0b3f] has been reserved
system 00:05: [io 0x0800-0x089f] could not be reserved
system 00:05: [io 0x0b20-0x0b2f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x0230-0x023f] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: [io 0x0a20-0x0a2f] has been reserved
system 00:06: [io 0x0a30-0x0a3f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xd5ffffff] could not be reserved
system 00:08: [mem 0xfed45000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:06.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xd6000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xd6000000-0xdfffffff window]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed44fff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16372K (ffff880035ff6000 - ffff880036ff3000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ cc000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25a5fa5b18f, max_idle_ns: 440795311877 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1460307224.024:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: AMD CPU family 0xf not supported
registered taskstats version 1
zswap: loaded using pool lzo/zbud
rtc_cmos 00:00: setting system clock to 2016-04-10 16:53:44 UTC (1460307224)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1304K (ffffffff81b0c000 - ffffffff81c52000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 424K (ffff880001596000 - ffff880001600000)
Freeing unused kernel memory: 1248K (ffff8800018c8000 - ffff880001a00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd urandom read with 2 bits of entropy available
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf9fff000
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
SCSI subsystem initialized
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xf9ffa800
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000c74000, 00:22:15:e0:b3:8f, XID 1c4000c0 IRQ 26
r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
libata version 3.00 loaded.
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-1-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci: OHCI PCI platform driver
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host2: ahci
scsi host3: ahci
FDC 0 is a post-1991 82077
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff900 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fff980 irq 22
ata5: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xf9fff800 port 0xf9fffa80 irq 22
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xf9ffe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.4.0-1-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xf9ffd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-1-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xf9ffc000
ata1.01: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-1-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xf9ffb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-1-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xf9ff9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0-1-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 3-1: new low-speed USB device number 2 using ohci-pci
ata6: softreset failed (device not ready)
ata6: applying PMP SRST workaround and retrying
ata3: softreset failed (device not ready)
ata3: applying PMP SRST workaround and retrying
ata5: softreset failed (device not ready)
ata5: applying PMP SRST workaround and retrying
ata4: softreset failed (device not ready)
ata4: applying PMP SRST workaround and retrying
usb 1-6: new high-speed USB device number 5 using ehci-pci
usb 3-1: New USB device found, idVendor=046a, idProduct=0011
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: READ LOG DMA EXT failed, trying unqueued
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: configured for UDMA/133
ata5.00: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133
ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
ata6.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata4.00: ATA-7: ST3500641AS, 3.AAE, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3500641AS E PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD40EZRX-00S 0A80 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
usb 1-6: New USB device found, idVendor=0b05, idProduct=17ab
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: 802.11n WLAN Adapter
usb 1-6: Manufacturer: Realtek
usb 1-6: SerialNumber: 00e04c000001
usb 3-2: new low-speed USB device number 3 using ohci-pci
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 3-2: New USB device found, idVendor=093a, idProduct=2521
usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-2: Product: USB OPTICAL MOUSE
usb 3-3: new full-speed USB device number 4 using ohci-pci
usb 3-3: New USB device found, idVendor=04e6, idProduct=5116
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: SCR3310 v2.0 USB SC Reader
usb 3-3: Manufacturer: SCM Microsystems Inc.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 046a:0011 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046A:0011.0001/input/input3
hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:12.0-1/input0
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:093A:2521.0002/input/input4
hid-generic 0003:093A:2521.0002: input,hidraw1: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: nonblocking pool is initialized
systemd[1]: Configuration file /etc/systemd/system/gcp.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice system-postgresql.slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Reached target Slices.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,discard
systemd[1]: Mounted Debug File System.
lp: driver loaded but no devices found
systemd[1]: Started Create list of required static device nodes for the current kernel.
ppdev: user-space parallel port driver
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Journal Service.
systemd-journald[184]: Received request to flush runtime journal from PID 1
lp0: using parport0 (interrupt-driven).
loop: module loaded
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
sr 0:0:1:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
snd_hda_codec_via hdaudioC0D0: CD=0x1f
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: PC Speaker as /devices/platform/pcspkr/input/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
kvm: Nested Virtualization enabled
powernow_k8: fid 0x12 (2600 MHz), vid 0xa
powernow_k8: fid 0x10 (2400 MHz), vid 0xc
powernow_k8: fid 0xe (2200 MHz), vid 0xe
powernow_k8: fid 0xc (2000 MHz), vid 0x10
powernow_k8: fid 0xa (1800 MHz), vid 0x10
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
Adding 7812092k swap on /dev/sda2. Priority:-1 extents:1 across:7812092k SSFS
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
rtl8192cu: Chip version 0x11
rtl8192cu: MAC address: 1c:b7:2c:d8:41:35
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
usb 1-6: firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
usbcore: registered new interface driver rtl8192cu
rtl8192cu 1-6:1.0 wlx1cb72cd84135: renamed from wlan0
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
IPv6: ADDRCONF(NETDEV_UP): wlx1cb72cd84135: link is not ready
wlx1cb72cd84135: authenticate with f8:8e:85:43:07:1f
wlx1cb72cd84135: send auth to f8:8e:85:43:07:1f (try 1/3)
wlx1cb72cd84135: authenticated
wlx1cb72cd84135: associate with f8:8e:85:43:07:1f (try 1/3)
wlx1cb72cd84135: RX AssocResp from f8:8e:85:43:07:1f (capab=0x411 status=0 aid=4)
wlx1cb72cd84135: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2
wlx1cb72cd84135: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2
wlx1cb72cd84135: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx1cb72cd84135: link becomes ready
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=1 offMin=0x4344 offMax=0x4344
vboxdrv: TSC mode is Asynchronous, tentative frequency 2605817213 Hz
vboxdrv: Successfully loaded version 5.0.16_Debian (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
fuse init (API version 7.23)
audit: type=1702 audit(1460317606.220:2): op=follow_link ppid=5013 pid=5179 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts3 ses=1 comm="BrowserBlocking" exe="/opt/google/chrome/chrome" res=0
audit: type=1302 audit(1460317606.220:3): item=0 name="/tmp/gcp-cups-connector.FATAL" inode=14336 dev=00:23 mode=0120777 ouid=1002 ogid=1002 rdev=00:00 nametype=NORMAL
audit: type=1702 audit(1460317606.220:4): op=follow_link ppid=5013 pid=5179 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts3 ses=1 comm="BrowserBlocking" exe="/opt/google/chrome/chrome" res=0
audit: type=1302 audit(1460317606.220:5): item=0 name="/tmp/gcp-cups-connector.INFO" inode=14608 dev=00:23 mode=0120777 ouid=1002 ogid=1002 rdev=00:00 nametype=NORMAL
audit: type=1702 audit(1460317606.220:6): op=follow_link ppid=5013 pid=5179 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts3 ses=1 comm="BrowserBlocking" exe="/opt/google/chrome/chrome" res=0
audit: type=1302 audit(1460317606.220:7): item=0 name="/tmp/gcp-cups-connector.WARNING" inode=14606 dev=00:23 mode=0120777 ouid=1002 ogid=1002 rdev=00:00 nametype=NORMAL
audit: type=1702 audit(1460317606.220:8): op=follow_link ppid=5013 pid=5179 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts3 ses=1 comm="BrowserBlocking" exe="/opt/google/chrome/chrome" res=0
audit: type=1302 audit(1460317606.220:9): item=0 name="/tmp/gcp-cups-connector.ERROR" inode=14604 dev=00:23 mode=0120777 ouid=1002 ogid=1002 rdev=00:00 nametype=NORMAL
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=0ea0, idProduct=2168
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Flash Disk
usb 2-1: Manufacturer: USB
usb 2-1: SerialNumber: 6CAB42BB3239008A
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access TinyDisk 2005-06-22 2.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg5 type 0
ready
sd 6:0:0:0: [sde] 511488 512-byte logical blocks: (262 MB/250 MiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sde] No Caching mode page found
sd 6:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sde1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.